1. Check before startup every day.

2、發動機曲軸箱機油耗量。

2. Engine crankcase oil consumption.

3、冷卻液面：散熱器和中冷器芯電有無阻塞現象。

3. Cooling liquid level: check whether the radiator and intercooler core are blocked.

4、空氣濾清器是否被阻塞。

4. Check whether the air filter is blocked.

5、每50小時檢查。

5. Check every 50 hours.

6、蓄電池及液面：排除漏水，漏燃油，漏機油現象。

6. Battery and liquid level: eliminate water leakage, fuel leakage and oil leakage.

7、每250－300小時：更換發動機機油，更換機油濾清器和旁道機油濾清器，更換燃油濾清器，需要時排放燃油箱油污，張緊三角膠帶。

7. Every 250-300 hours: change the engine oil, change the oil filter and bypass oil filter, change the fuel filter, drain the oil stain of the fuel tank when necessary, and tighten the triangular tape.

8、檢查散熱器和風冷式中冷器的芯電是否堵塞，是否需要清潔，檢查空氣管道及其軟管接頭應沒有壞件并生新擰緊卡箍 ,檢查增器的機油進回油處應無滲漏。

8. Check whether the electric core of radiator and air-cooled intercooler is blocked and needs to be cleaned. Check whether the air pipe and its hose connector are free of damaged parts, and tighten the clamp. Check that there is no leakage at the oil inlet and return of booster.

9、每1200小時，請專業人員檢查和調整氣門間隙，檢查調整前在發動機停車及冷態下進行，每2400小時，請專業人員折卸和檢查調整噴油器，由專業人員檢查增壓器的工作狀態，并對發動機及發電機件進行常規檢查，每6個月，更換冷卻液過濾器，每年，清洗冷卻器，更換冷卻液。

9. Every 1200 hours, ask professional personnel to check and adjust the valve clearance. Before the inspection and adjustment, ask professional personnel to disassemble, check and adjust the fuel injector every 2400 hours. Professional personnel will check the working state of the supercharger and carry out routine inspection on the engine and generator parts. Every 6 months, replace the coolant filter and clean the cooler every year, Replace the coolant.

以上就是今天小編給大家提供的精彩內容，更多的精彩內容請點擊進入我們的官方網站：機油濾芯http://dgtmcnc.com

The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: engine oil filter element http://dgtmcnc.com