The core equipment of gas-fired cold, hot and electric distributed energy system includes gas generator set, absorption cold (hot) water unit and waste heat boiler. Auxiliary equipment includes various pumps, valves, cooling towers, cooling fans, distribution cabinets, etc. How to make these devices operate more energy-saving and economically, the control system is the key.

燃?xì)獍l(fā)電機組在運行過程中產生兩種能源：電力能源和熱力能源。更加理想和經濟的方案是100%利用電力能源和熱力能源。但現實應用中，電力能源和熱力能源的需求是不斷變化的。電力能源我們可以通過上網的方式將多余電力能源賣給電力公司，但多余的熱力能源我們不能利用，只能通過排煙系統和散熱水箱對空排放。因此分布式能源項目中，項目的經濟可行性是重要方面。

During the operation of gas-fired generator sets, two kinds of energy are generated: electric energy and thermal energy. A more ideal and economical solution is to make 100% use of electric energy and thermal energy. However, in practical applications, the demand for electric energy and thermal energy is constantly changing. Electric energy we can sell excess electric energy to power companies through the Internet, but we can't use the excess thermal energy, which can only be discharged into the air through the smoke exhaust system and cooling water tank. Therefore, in the distributed energy project, the economic feasibility of the project is an important aspect.

我們需要了解項目的電力需求和熱力需求，設計出發電機組更加經濟的運行方案。是以電定熱，還是以熱定電。

We need to understand the power demand and thermal demand of the project and design a more economical operation scheme for the starting generator set. Whether to determine heat by electricity or electricity by heat.

當市場上電力能源經濟性能較好時，項目應用將以能發出更多的電能為主要目標進行設計，同時考慮更大程度上地進行余熱利用。當熱力能源過剩時對空排放。項目設計中將以電定熱；當項目應用中熱力能源經濟性能較好時，項目設計中將以滿足用戶所需要的熱為主要需求，在產生熱的同時項目中多余的電力能源將通過與市電并網的方式向市網輸送。這就是以熱定電的設計方式。在這種項目應用中一定要協調市電部門，獲得上網許可證。確定了以熱定電或以電定熱以后，我們將設計合適的控制系統控制燃?xì)獍l(fā)電機組按要求正常運行。

When the economic performance of electric energy in the market is good, the project application will be designed with the main goal of generating more electric energy, and consider the utilization of waste heat to a greater extent. When there is excess thermal energy, air emissions. The heat will be determined by electricity in the project design; When the economic performance of thermal energy in the project application is good, the project design will take meeting the heat required by users as the main demand. While generating heat, the excess electric energy in the project will be transmitted to the municipal power grid through grid connection with the municipal power. This is the design method of determining electricity by heat. In the application of such projects, we must coordinate with the municipal power department and obtain the Internet license. After determining whether the power is determined by heat or by electricity, we will design an appropriate control system to control the normal operation of the gas generator set as required.

燃?xì)饫?、熱、電分布式能源項目的控制系統一般分為顯示模塊、計算與控制模塊、報警保護模塊和數據記錄模塊四個功能模塊。

The control system of gas cooling, heating and electricity distributed energy project is generally divided into four functional modules: display module, calculation and control module, alarm protection module and data recording module.

1)顯示模塊： 現代化的設備都有自己的控制系統。任何單獨的設備都可以自動按照預先設定的工況運行。同時所有的運行參數都可以通過數據線上傳到上位機中。燃?xì)饫洹?、電分布式能源項目的控制系統顯示模塊就是勾勒出整個系統的所有設備，通過畫面，直觀地顯示出所有設備的運行狀態和運行參數。

1) Display module: modern equipment has its own control system. Any individual equipment can automatically operate according to the preset working conditions. At the same time, all operating parameters can be uploaded to the upper computer through the data line. The display module of the control system of the gas cooling, heating and electricity distributed energy project is to outline all the equipment of the whole system, and intuitively display the operation status and operation parameters of all equipment through the screen.

2)計算與控制模塊： 主要是通過傳感器計算系統的運行狀態。并根據項目要求設計 所需要的目標狀態。將系統的運行狀態與目標狀態進行比對后發出調節指令。為了確保功能的穩定與準確，建議控制系統采用雙閉環控制。

2) Calculation and control module: it mainly calculates the operation state of the system through sensors. And design the required target state according to the project requirements. After comparing the running state of the system with the target state, issue the adjustment command. In order to ensure the stability and accuracy of the function, it is recommended that the control system adopt double closed-loop control.

3)報警保護模塊： 主要功能是當系統遇到危險狀態時可以報警提示，嚴重時自動關閉某些設備或者使整個系統停止運行，以保護系統不受到更大的傷害。系統中自動停機的危險狀態有：高水溫、低油壓、超速、汽缸爆震、燃?xì)庑孤┑取?/div>