我們都清楚，在工業生產中由于產品和工藝特點，會產生各種可燃氣體，其中礦熱爐尾氣就屬于比較典型的工業尾氣，同樣它也是大量的可燃尾氣，只要通過工業尾氣發電機組利用好這些尾氣，就能夠?qū)崿F(xiàn)變廢為寶的奇跡，也可以幫助企業在創造效益的同時節能減排。

We are all aware that various combustible gases are produced in industrial production due to the characteristics of products and processes. Among them, the tail gas of the mine heat furnace is a typical industrial tail gas, and it is also a large amount of combustible tail gas. As long as these tail gases are well utilized by industrial tail gas generator sets, the miracle of turning waste into treasure can be achieved, and it can also help enterprises create benefits while saving energy and reducing emissions.

既然想要去更好的利用工業尾氣為我們自身服務乃至于創造應有價值，那么就需要弄清楚它的產生、結構、“產量”等源頭問題，其主要由CO和H?構成，是在生產過程中伴隨產出的，按照漏風率8%估算，基本上可以達到一噸硅錳合金產氣量960~1100Nm3左右，影響此類工業尾氣質量的因素是電爐的密封狀況，產量如此巨大的礦熱爐工業尾氣，一旦合理利用，將會通過工業尾氣發電機組創造出比較可觀的效益。而其利用方法主要有蒸汽鍋爐發電、內燃機發電、制甲醇、乙醇，燒石灰窯等。

Since we want to better utilize industrial exhaust gas to serve ourselves and even create the necessary value, we first need to understand its generation, structure, "output" and other source issues, which are mainly caused by CO and H? Composition is generated during the production process. Based on an estimated air leakage rate of 8%, the gas production capacity of one ton of silicon manganese alloy can reach around 960-1100Nm3. The factor affecting the quality of such industrial exhaust gas is the sealing condition of the electric furnace. Once the industrial exhaust gas of such a huge production capacity is reasonably utilized, it will create considerable benefits through the industrial exhaust gas generator set. And its utilization methods mainly include steam boiler power generation, internal combustion engine power generation, methanol and ethanol production, lime kiln, etc.

近年來，隨著內燃機發電技術的引領和市場的推動下，礦熱爐工業尾氣發電機組得到了大量的推廣應用以及用戶的高度認可，也為苦苦尋找更優工業尾氣解決方案的客戶雪中送炭，尤其是在能耗雙控政策大背景下，降低了企業能耗、為企業創造了可觀的收益，實現了節能減排，提高了鐵合金企業的盈利能力。

In recent years, with the leadership of internal combustion engine power generation technology and the promotion of the market by Kemei Holdings, the industrial exhaust gas generator set of the mine heat furnace has been widely promoted and highly recognized by users. It has also provided timely assistance to customers who are struggling to find better industrial exhaust gas solutions. Especially in the context of the energy consumption dual control policy, it has reduced enterprise energy consumption, created considerable profits for enterprises, and achieved energy conservation and emission reduction, Improved the profitability of ferroalloy enterprises.

工業尾氣發電機組，具有靈活、適應性強、建站周期短等特點，主要采用12V190機型，該機型成熟、可靠、市場占有率高。應用了多項自主核心技術，包括雙路進氣雙增壓、單缸控制、缸內混合、自動控制等技術，徹底解決了傳統預混進氣結構內燃機由于氫氣導致的回火，可靠性差，運行成本高等問題，成功實現了工業尾氣內燃機發電的市場化運行。

Komei Industrial Exhaust Gas Generator Unit has the characteristics of flexibility, strong adaptability, and short station construction period. It mainly adopts the 12V190 model, which is mature, reliable, and has a high market share. We have applied multiple independent core technologies of Kemei, including dual intake and dual turbocharging, single cylinder control, cylinder mixing, automatic control, etc., completely solving the problems of traditional premixed intake structure internal combustion engines caused by hydrogen gas, poor reliability, and high operating costs. We have successfully achieved market-oriented operation of industrial exhaust internal combustion engine power generation.

如生產中耗電量大概在4000kW?h/t的硅錳合金，在這一過程里可產生尾氣1100Nm3/t，除去廠內礦石燒結、預熱等用氣外，可用于發電的尾氣在600~700Nm3/t這一區間內，若采用工業尾氣發電機組進行能源的二次利用，按照一方氣發一度電計算，可發電600~700kW?h，相當于幫助企業每年減少15~20%的能耗！

Is the power consumption during production approximately 4000kW? The h/t silicon manganese alloy can generate exhaust gas of 1100Nm3/t during this process. Apart from the gas used for ore sintering and preheating in the factory, the exhaust gas that can be used for power generation is in the range of 600-700Nm3/t. If Komei Industrial Exhaust Gas Generator Set is used for energy secondary utilization, it can generate 600-700kW based on the calculation of one cubic meter of gas for electricity generation? h. Equivalent to helping enterprises reduce energy consumption by 15-20% annually!

由此可見，巧妙使用工業尾氣進行發電，不僅能夠滿足日漸提高的環保要求，還具有廣闊的市場前景，而一直深耕于此的，將一如既往的通過技術引領市場，轉化廢氣變現為效益，為企業提供更優質的工業尾氣發電機組，助力鐵合金企業的發展，致力行業的節能減排，為鐵合金行業的穩定、有序、向好，礦熱爐尾氣的利用做出應有的貢獻。

From this, it can be seen that cleverly using industrial exhaust gas for power generation not only meets the increasing environmental requirements, but also has broad market prospects. Kemei people, who have been deeply involved in this field, will continue to lead the market through technology, convert exhaust gas into benefits, provide enterprises with higher quality industrial exhaust gas generator sets, help the development of ferroalloy enterprises, devote themselves to energy conservation and emission reduction in the industry, and contribute to the stability, order, and development of the ferroalloy industry Make a positive contribution to the utilization of tail gas from mining furnaces.

本文來自：工業尾氣發電機組更多的內容請點擊：http://dgtmcnc.com我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article comes from: Industrial exhaust gas generator sets. For more information, please click: http://dgtmcnc.com We will provide satisfactory service for the questions you ask. Welcome to call us!