Many users will encounter unstable voltage of diesel generator set in the process of using diesel generator set. What is the reason? How should we deal with it? The following are the causes and solutions of voltage instability of diesel generator set:

1、電線接線部份松動 檢查柴油發電機組各連接部分，并與修理。

1. Check and repair the connecting parts of diesel generator set for looseness of wire wiring.

2、控制屏電壓-電流選擇開關失效 更換柴油發電機組開關。

2. If the voltage current selection switch on the control panel fails, replace the switch of diesel generator set.

3、控制屏電壓調整電阻器失效 更換電壓調壓電阻器。

3. The voltage regulation resistor of the control panel is invalid. Replace the voltage regulation resistor.

4、電壓表失效 ，顯示電壓不穩 更換電壓表。

4. If the voltmeter fails and the voltage is unstable, replace the voltmeter.

5、發電機電壓調節器不良或未調整調壓器 仔細檢查電壓調節器是否不良或沒有調整到位。即時更換或調整。

5. The generator voltage regulator is poor or not adjusted. Carefully check whether the voltage regulator is poor or not adjusted in place. Replace or adjust immediately.

6、可能柴油發電機組運轉中振動過大引起 即時查看是不是發電機組的減震墊損壞或機組不平衡。

6. It may be caused by excessive vibration during the operation of diesel generator set. Check immediately whether the damping pad of generator set is damaged or the unit is unbalanced.

7、可能是發動機的速度不穩定引起電壓不穩 調整或改換柴油機燃油系統零件使其速度穩定。

7. The voltage instability may be caused by the unstable speed of the engine. Adjust or change the parts of the fuel system of the diesel engine to stabilize the speed.

以上就是190發電機組配件http://dgtmcnc.com為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is 190 generator set accessories http://dgtmcnc.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!