1. Gas engine: DEUTZ 6m, 8m, 234, 604 and 620 series and Cummins B series, C series, l series, M series, n series and K series diesel engines are used as the development body. According to the physical characteristics of gas fuel, the cylinder head, piston, piston ring, inlet and exhaust valves, valve seat ring, camshaft and other main heat load components are re optimized, The service life of the engine under high heat load is prolonged. The fan, cooling water tank, intercooler, turbocharger, exhaust manifold and other components are re selected according to the characteristics of the gas engine, which is a real gas engine.

2、工業級點火控制系統：電控（ECU）順序點火系統，根據氣體發電機組使用工況，通過軟件對其進行實時標定，編制負荷-點火MAP圖，精確控制點火時間。匹配工業級高能量獨立點火線圈（80毫焦-300毫焦可選擇）和火花塞，提高燃燒效率，降低發動機排溫，改善啟動性能，穩定而可靠。

2. Industrial ignition control system: electronic control (ECU) sequential ignition system. According to the service conditions of gas generator set, it is calibrated in real time through software, and the load ignition map is prepared to accurately control the ignition time. Match industrial high-energy independent ignition coil (80 mj-300 MJ optional) and spark plug to improve combustion efficiency, reduce engine exhaust temperature, improve starting performance, stable and reliable.

3、燃氣專用速度控制系統：采用燃氣專用速度控制器，轉速波動小，瞬態反應快，運行平穩，輸出電源質量高，機組電器性能達到G2標準以上。 穩態轉速調整率≤±0.2% 瞬態轉速調整率≤±4% 頻率波動率≤±0.5% 穩態電壓調整率≤±0.3% 穩定時間≤2秒。

3. Special speed control system for gas: the international famous brand special speed controller for gas is adopted, with small speed fluctuation, fast transient response, stable operation, high output power quality, and the electrical performance of the unit reaches above G2 Standard. Steady state speed adjustment rate ≤± 0.2%, transient speed adjustment rate ≤± 4%, frequency fluctuation rate ≤± 0.5%, steady state voltage adjustment rate ≤± 0.3%, stability time ≤ 2S.

4、低壓力設計、低燃料消耗：采用燃氣流量控制技術、稀薄燃燒技術，優化增壓系統，精確高能量點火，提供發動機燃燒效率，降低燃料消耗。管線壓力達到0.5kpa即可使用。

4. Low pressure design and low fuel consumption: international advanced gas flow control technology and lean combustion technology are adopted to optimize the pressurization system, accurate high-energy ignition, provide engine combustion efficiency and reduce fuel consumption. When the pipeline pressure reaches 0.5kpa, it can be used.

5、發電機：采用的無刷自勵帶電壓自動調節器的同步發電機，主轉子為整體凸極沖片，采用鋁壓鑄和全阻尼繞組連成一體，繞組間層采用高級熱固性環氧填充，具有良好的電氣絕緣性和可靠的機械強度。發電機符合GB755,BS5000,VDE0530,NEMAMG1-22,IED34-1,CSA22.2和AS1359標準。

5. Generator: the well-known brand brushless self excitation synchronous generator with automatic voltage regulator is adopted. The main rotor is an integral salient pole punch, which is connected by aluminum die casting and full damping winding. The winding interlayer is filled with high-grade thermosetting epoxy, which has good electrical insulation and reliable mechanical strength. The generator complies with gb755, bs5000, vde0530, nemamg1-22, ied34-1 and csa22 2 and as1359.

6、燃氣供應安全閥組：燃氣調節管線及安全設計符合歐盟氣體零部件標準90/356/EWG的認證。

6. Gas supply safety valve group: the gas regulating pipeline and safety design meet the certification of EU gas parts standard 90 / 356 / EWG.

7、機組控制柜：采用comAp控制器，有極高的可靠性和穩定性。模塊化設計，結構緊湊，接線簡單，操作簡便，維修方便。控制屏具有4行超寬LCD文本顯示及多種保護功能，可實現遠程監控。

7. Unit control cabinet: COMAP controller of international famous brand is adopted, which has high reliability and stability. Modular design, compact structure, simple wiring, simple operation and convenient maintenance. The control panel has 4 lines of Ultra Wide LCD text display and various protection functions, which can realize remote monitoring.

8、余熱回收系統：采用高效率熱交換器，回收缸套水和煙氣余熱，產生高品質熱水或蒸汽，機組總熱效率大于85%（可根據客人具體要求進行設計），符合歐洲D(zhuǎn)GRL 97/23標準

8. Waste heat recovery system: high efficiency heat exchanger is adopted to recover the waste heat of cylinder liner water and flue gas to produce high-quality hot water or steam. The total thermal efficiency of the unit is greater than 85% (it can be designed according to the specific requirements of customers), which meets the European dgrl 97 / 23 standard

9、智能化熱電聯產控制控制系統：專利技術生產的智能CHP管理系統，能實現以熱定電或以電定熱，滿足用戶的不同需求。

9. Intelligent cogeneration control system: the intelligent CHP management system produced by patented technology can determine electricity by heat or electricity to meet the different needs of users.

10、靜音設計：7米處機組噪音聲壓等級≤70分貝，部分機組小于55分貝。

10. Mute design: the noise pressure level of the unit at 7m is ≤ 70 dB, and that of some units is less than 55 dB.

11、氣體機組制造標準：符合NEMA/ISO/IEC/CSA、ISO8528、ISO3046、GB/T2820.5-1997、BG/T22343-2008。

11. Manufacturing standards of gas unit: comply with NEMA / ISO / IEC / CSA, ISO8528, iso3046 and GB / t2820 5-1997、BG/T22343-2008。

12、氣體機組安全標準：符合歐洲燃氣系統技術規范90/356/EWG、ECE R110、R67、CE標準

12. Safety standard of gas unit: comply with European technical specification for gas system 90 / 356 / EWG, ECE R110, r67 and CE standards